banner
Home » Products > Homogenizer > Pneumatic Lifting Homogenizer
Product Categories

Removable Pneumatic and Electrical Lifting Dispenser Blender for Mixing Oil Paint with Open Mixer Tank

LH pneumatic lifting-up and down homogenizer Manual operation 1.Main use LH-speed lift homogenizer is special for a number of different viscosity liquid stirred at high...

Send Inquiry


Removable Pneumatic and Electrical Lifting Dispenser Blender for Mixing Oil Paint with Open Mixer TankManual operation


1.Main use

 lift homogenizer is special for a number of different viscosity liquid stirred at high speed, homogenizering, dissolving, mixing efficient equipment, material movement at different speeds through a special shear impeller rotation, so that rapid dispersion of aggregates, and then to dissolve, emulsify, homogeneous mixing, high quality and efficiency of fast, wide range of applications.


Removable Pneumatic and Electrical Lifting Dispenser Blender for Mixing Oil Paint with Open Mixer Tank


2.Structure
This series of machines are: support frame, motor, homogenizing head, cylinder, electrical control systems and control devices. Compact, easy to install, clean and generous appearance.
Homogeneous pinion lift off with pneumatic type, up off the smooth and flexible. Homogeneous gear shaft and main parts are all made of stainless steel, wear resistance, corrosion resistance, excellent quality and long service life, smooth operation, low noise, any rise in the operation down, according to material viscosity, speed arbitrary regulation to prevent the material flying, dispersion impeller for a variety of materials.
Installation method is flexible to adapt to a variety of venues operation is extremely simple, easy maintenance, strong and beautiful body. Advanced features, easy to operate, safe facilities will bring your work pleasant.


3.Parameter
Capacity:100-300L
Power:4kw 380v 50Hz
Material connect material:SUS304
Material of frame:stainless steel
Motor:Siemens motor
Inverter:Delta
Air pressure:4-8 kg/cm2
Homogenizer speed:0-2880r/min
The height of homogenizer can be lifted:1000mm
Size:1.0*1.0*2.1m


4.Installing and testing for lifting high shear mixer
When this series is mainly mechanical spindle must be installed perpendicular to the ground, with a spirit level test. To confirm that the installation has been fully tightened fixing bolts, each part of the normal, power, running direction of the specified flag.
1) pneumatic lifting, work pressure (about 4 kg / cm2) by automatic lift switch control price rise.
2) reference frequency control electronic control panel instructions, pay particular attention to: wiring, high speed, low speed rotational direction must be as indicated in the same direction before changing speed. Please explain in detail with reference to the inverter using the inverter.


5.Use and maintenance
1) the host using the selected container is recommended when chainring diameter is D, the vessel diameter is in 3D, from the bottom of the barrel height chainring should normally be 0.5-07D, will be placed in a container in the middle chainring position, according to the operating instructions start the main motor to adjust the appropriate speed, the operation should pay attention to the current situation, such as found in overload operation, should stop to check.
2) bearings, slider parts should always maintain good lubrication condition, after working to clean up various parts of the dirt to keep clean and in good condition of the device.
3) the electrical part of the surroundings should be kept clean to prevent oil stains and water damage was dropped inside the controller, and avoid severe vibration. When the element is damaged, it should be replaced.
4) disable the device for a long time, you must turn off the power, clean the surface of the grease lubrication, spindle and cylinder section should oiled protection requires electrical parts inspected once every six months. After a year of continuous use the device, it is recommended to conduct a comprehensive maintenance.
5) pneumatic lift off the air compressor to maintain the working pressure of 4 kg or more, regular cleaning of sewage storage cylinder to ensure clean air and prolong life.


6.Instruction

pneumatic homogenizer.jpg





Yeto Machine is a professional manufacturer and supplier of various machine. Please rest assured to buy the high-end removable pneumatic and electrical lifting dispenser blender for mixing oil paint with open mixer tank with competitive price from us. We will offer you good after-sale service and fast delivery.

Inquiry