banner
Home » News » Content
Product Categories

Mixer-initial Debugging Rules

- Feb 07, 2017 -

First of all make sure the mixer connected power is to meet the requirements of, and is mainly look at the voltage connected after power up the device, observe whether the mixer Auger turning to the right, if you should switch to the motor wiring contrary to standard; but also to ensure the equipment in operation when there is no noise issue.


And are entered into the material blending process, adverse effect if the initial hybrid, can be adjusted by replacing the aperture sieve, plus you can adjust the material intake, just adjust the nozzle tube's bottom can be a distance from the pit, the effect will be significantly enhanced.