banner
Home » Products > Packing Machine
Product Categories

Vertical Electric Lotion Paper Box Shrinking Wrapping Machine

Adjustment and usage way 1.One-way wiring methods,put the power cable connected to the machine at the power supply, wiring methods: line, neutral line (is the zero line)...

Send InquiryChat Now


Vertical Electric Lotion Paper Box Shrinking Wrapping Machine


Adjustment and usage way
1.One-way wiring methods,put the power cable connected to the machine at the power supply, wiring methods: line, neutral line (is the zero line), ground wire and ground terminal must be grounded.

2.Test machine, after the power cable is connected, the power to send the control panel, let the temperature controller to zero position. Conveyor belt, the upper and lower heater pipe knob to zero, turn to the left of the tune, and then close the power switch, fan switch, belt properly adjusted, let it run, and then adjust the temperature controller set temperature. Then adjust the upper and lower heating tube knob to the maximum, turn to the right tone. At this time the machine has been heating up in working condition. When the temperature rises to the set temperature, the thermometer indicates to the set temperature value, the table header indicates the red light, you can make product packaging to test machine.

3.Operating temperature setting, PVC film is generally 120℃ to 160℃, PP film is 150℃ to 180℃, according to the product first packing to adjust high or low temperature and conveyor speed When Product has wrinkles, indicating that the temperature is not enough or too fast transportation. Product is film rupture, indicating that the temperature is too high or conveyor speed is too slow. Repeatedly test machine so that products reach the best results, please make note of the temperature and the transmission voltage value until the next boot easy to use.

4.When finishing the working, please do not immediately cut off the power, should put the upper and lower heating tube knob to zero, adjust the temperature control to the zero position,use of fans disperse the heat, cooling time is about 15 minutes, then put the transferred knob to zero knob, turn off the fan switch, disconnecting the power supply switch.

5.Three-phase four-wire type, wiring way: phase line, phase line, phase line, neutral line also the zero lines hanging sign. Ground terminal must be grounded.

6.As mentioned before work test machine, three-phase four-wire system type only increases the temperature heating system and fan speed control function.

7.The modem control lines concentrated in the control cabinet, if to open the control panel or control cabinet, please completely cut off the power and ask the professional electrical personnel for repair and maintenance.


Packing machine-LH-far infrared shrink film machine
Introduction
Power supply: 380V-220v
Maximum power: 6kw
Max packing size: 200 × 400 W × H)
Set weight: 8kg
Conveying speed:0-12m / minute
Weight: 50kg
For shrink film material: PVC PP POF etc.

Principles and characteristics
The shrink wrap machine shrink film outside of the product or package, then heated to shrink packaging products and bind tightly to package the full appearance of the item, with a sealed, moisture, dirt.
Power: 6 (kw)
Voltage: 380-220 (V)
Turntable diameter: 0 (mm)
Custom processing:
Package Height: 200 * 400 (mm)
Type: Packing Machine
Weight: 50 (kg)
Model: 20 * 40
Applicable industries: food, clothing, chemicals, textiles, gifts, handicrafts, cosmetic, food, toys, tobacco, pharmaceutical, metal, machinery turntable bearing: 10 (kg)
Turntable height: 0 (mm)
Turntable speed: 0 (r / m)


Yeto Machine is a professional manufacturer and supplier of various machine. Please rest assured to buy the high-end vertical electric lotion paper box shrinking wrapping machine with competitive price from us. We will offer you good after-sale service and fast delivery.

Inquiry