Before using the vacuum homogenizing emulsifier, it is necessary to formulate corresponding safety production operating procedures to ensure the safety of operators and equipment. The user of the electrical control system should set up a safety protection system and have a good and reliable electrical motor grounding device.
According to the different media used by the user, the inlet and outlet filters must be cleaned regularly to avoid reducing the feed volume and affecting the production efficiency. The materials entering the working chamber must be fluid. Materials with dry powder and agglomerates are not allowed to enter the machine directly, otherwise, it will cause the machine to become stuffy and damage the vacuum homogenizing emulsifier.
It is strictly forbidden for metal shavings or hard and difficult-to-break debris to enter the working cavity of the vacuum homogenizing emulsifier to avoid devastating damage to the working stator, rotor and equipment.
After the vacuum homogenizing emulsifier confirms that the machine seal cooling water is connected, start the motor, and repeatedly require that the rotation of the motor should be consistent with the rotation mark of the spindle before it can operate. It is strictly forbidden to reverse!
When using a vacuum homogenizing emulsifier, the liquid material must be continuously input or kept in a certain amount in the container. Empty machine operation should be avoided, so as not to cause high temperature or crystal solidification of materials during work and damage the equipment!
If liquid leakage is found at the shaft during operation, the pressure of the mechanical seal must be adjusted after shutdown.
When the vacuum homogenizing emulsifier is in operation-once there is an abnormal sound or other failure, it should be shut down immediately for inspection, and then run again after the failure is eliminated. Clean the working chamber, stator and rotor after shutdown.
After the production is completed, the vacuum homogenizing emulsifier must be cleaned up, so as to maintain the working efficiency of the stator and rotor, but also to protect the vacuum homogenizer emulsifier seal. When necessary, design and install a cleaning cycle device near the periphery.
The vacuum homogenizing emulsifier needs to check the stator and rotor regularly. If it is found to be excessively worn, the corresponding parts should be replaced in time to ensure the effect of dispersion and emulsification.
Yeto Machinery Co., Ltd. is a cosmetics equipment manufacturer specializing in the development and production of vacuum homogenizing emulsifiers, automatic filling machines and capping machines, bottle washing machines and RO reverse osmosis water treatment equipment. Welcome people in the cosmetics equipment industry and customers in the cosmetics industry to come to our company for inspection and guidance.