Lifting Vacuum Homogenizer And 10 Major Design Features

Lifting Vacuum Homogenizer and 10 major design features
   Lifting Vacuum Homogenizer is a miniaturized benchtop sample handling device designed for use in bio-engineering laboratories and small-scale production for cell crushing.
1, Lifting Vacuum Homogenizer is easy to operate and maintain the design; can use distilled water, pure water and cleaning agent for cleaning (at this time do not press the pressure switch), or remove the pump head for manual cleaning.
2, the machine start / stop control is located on the side of the machine, easy to operate, can be used for emergency switch, and includes the main motor thermal magnetic protection.
3, Lifting Vacuum Homogenizer equipped with polished stainless steel shell, removable, easy to check and maintain. The base stands on four rubber mats.
4, this machine through the self-gravity suction, does not require any feed pump. Only the power supply without the need for other facilities (such as water or compressed air) 5, in accordance with the requirements of the sample, with different materials, gasket; standard gasket material for the special plastic. The plunger seal uses a special PTFE material for water lubrication.
5, refine the role of more intense. This is because the working valve between the valve core and the valve seat in the initial position is closely fit, but only in the work of the material forced out of a slit; and centrifugal emulsification equipment between the stator to meet the high-speed Rotation and does not produce too much heat, there must be a large gap (relative to the homogeneous valve); the same time, because the homogenizer transmission mechanism is the volume reciprocating pump, so theoretically, homogeneous pressure can be unlimited To improve, and the higher the pressure, the better the effect of refinement.
6, lifting vacuum homogenization machine is the use of the refinement of the interaction between the material, so the material heat is small, and thus can maintain the basic performance of the same material.
7, lifting vacuum homogenization function Quantitative conveying material, because it relies on reciprocating pump feed.
8, Lifting Vacuum Homogenizer energy consumption.
9, Lifting Vacuum Homogenizer of the more vulnerable to maintenance work more, especially in the case of high pressure.
10 Lifting Vacuum Homogenizer is not suitable for high viscosity conditions.
Lifting Vacuum Homogenizer is a special equipment for liquid material homogenization and high pressure transmission. It is widely used in food, dairy products, beverage, pharmaceutical, fine chemical and biotechnology, etc. Scientific research and technology development. As a high-pressure homogeneous use: can make the material in the crowded research. Strong impact and loss of pressure under the triple effect of the material to refine the mixture. This equipment is an important equipment for food, dairy, beverage and other industries. Milk milk and other types of dairy drinks, under high pressure homogenization, can make dairy liquid in the fat ball significantly refined, so that its products easy to digest and absorb after consumption, improve the use of value. For the production of ice cream and other products, can improve the liquid material cleanliness and the degree of loose, so that the inherent texture was significantly improved. For the production of emulsions, gels, etc. In the production of pulp and so on, it can prevent or reduce the liquid layer, improve the appearance of the liquid material, make it more bright color, more fragrant, taste more alcohol. As a high-pressure pump used: the material produced by the equipment high pressure, through the spray drying equipment made of powder, powder production is an important equipment. The equipment in the other material of the homogeneous and high pressure transmission, high pressure injection occasions can be used.
Lifting Vacuum Homogenizer 6 major features
Refinement is more intense. This is because the working valve between the valve core and the valve seat in the initial position is closely fit, but only in the work of the material forced out of a slit; and centrifugal emulsification equipment between the stator to meet the high-speed Rotation and does not produce too much heat, there must be a large gap (relative to the homogeneous valve); the same time, because the Lifting Vacuum Homogenizer transmission mechanism is the volume reciprocating pump, so theoretically, homogeneous The pressure can be increased indefinitely, and the higher the pressure, the better the effect of refinement.