What Are The Characteristics Of The Design Of The Lifting Vacuum Homogenizer?

What are the characteristics of the design of the Lifting Vacuum Homogenizer?
1, Lifting Vacuum Homogenizer is easy to design and maintenance in the design; can use distilled water, pure water and detergent to stop the cycle of cleaning (at this time do not press the pressure switch), or disassemble the pump head to stop manual cleaning.
2, the machine start / stop control is located on the side of the machine, easy to operate, can be used for emergency switch, and includes the main motor thermal magnetic maintenance.
3, Lifting Vacuum Homogenizer equipped with polished stainless steel shell, removable, easy to check and maintain. The base stands on four rubber mats.
4, this machine through the self-gravity suction, does not require any feed pump. Only need electricity supply without the need for other equipment (such as water or compressed air). In accordance with the sample request, with different materials of the gasket; standard gasket material for the special plastic. The plunger seal uses a special PTFE material for water lubrication.
5, refine the role of more intense. This is due to the work valve between the valve core and the valve seat in the initial position is closely fit, but at work was forced out of the material out of a slit; and centrifugal emulsification equipment between the stator to meet the high-speed Rotation and does not produce too much heat, there must be a large gap (relative to the homogeneous valve); the same time, because the Lifting Vacuum Homogenizer transmission mechanism is the volume reciprocating pump, so theoretically, homogeneous The pressure can be infinitely improved, and the higher the pressure, the better the effect of refinement.
6, Lifting Vacuum Homogenizer of the role of the main application of the interaction between the material, so the material heat is small, and thus can adhere to the basic performance of the material unchanged.
7, lifting the vacuum homogenization function quantitative feed material, because it relies on reciprocating pump feed.
8, Lifting Vacuum Homogenizer energy consumption.
9, Lifting Vacuum Homogenizer of the more vulnerable to maintenance work more, especially in the case of high pressure.
10, Lifting Vacuum Homogenizer is not suitable for high viscosity situation.
    The use of Lifting Vacuum Homogenizer is wide, mainly used in biomedicine; food industry; daily care products; paint ink; nano materials; petrochemical; printing and dyeing auxiliaries; paper industry; pesticide fertilizer; plastic rubber; Other precision chemical industry.
Lifting Vacuum Homogenizer in the application of soy milk: homogenization of soybean milk under high pressure from the homogeneous valve slit out. Fat globules, proteins and other particles in the shear force, impact force and hole effect under the joint action, to stop the refinement. Constitute a uniform dispersion. To avoid fat floating, protein precipitation, increase bean milk gloss, improve the stability of soy milk. Soybean milk homogenization effect by the homogeneous pressure. Homogeneous temperature and homogeneity of three factors.
Lifting Vacuum Homogenizer in the application of raw milk: in the strong mechanical action 16.7 ~ 20.6MPa will be large breast fat ball broken into small fat ball. So that the average divergence in the milk. Can effectively avoid the fat ball floating. In the consumption of pasteurized milk. The position of the ordinary Lifting Vacuum Homogenizer is in the first heat recovery section of sterilization. In the indirect heating of ultra-high temperature sterilization milk consumption, Lifting Vacuum Homogenizer before sterilization. In the direct heating of ultra-high temperature sterilized milk consumption. The Lifting Vacuum Homogenizer is located after sterilization. Therefore, we should use sterile Lifting Vacuum Homogenizer.
Lifting Vacuum Homogenizer in the application of citrus juice: citrus juice by centrifugal separation, the pulp particles have been quite uniform. In order to further refine the particles. After centrifugation can be used to lift the vacuum homogenizer with 20 ~ 35MPa pressure to stop homogenization.