The filling machine itself is a cosmetic equipment with relatively high mechanical precision standards, and there will be some common failures. Today, from the perspective of cosmetic equipment manufacturers, we will introduce some solutions to common faults of filling machines to customers and friends.
Common causes of filling machines are divided into three aspects: tunnel failure, switch angle failure and host failure.
The tunnel cannot operate normally, which means that it is necessary to pay attention to regular shutdowns for maintenance. If the motor does not work, check the normally open point of the switch, replace the button, measure the resistance of the potentiometer, whether the input and output voltage of the inverter is normal, and consider whether to modify or replace it. In addition, if the motor does not start, the circuit breaker may lack phase and the control circuit transformer is broken. At this time, replace the relevant parts.
The switch angle cannot be located, so the reason is that the rotary encoder wire is broken. The PLC is broken. Replace the rotary encoder or check the circuit to fix it.
The failure of the host machine should be analyzed in many aspects: low or no air pressure, broken start button or broken wire, broken emergency stop button or broken wire, or even reset, thermal overload or contactor broken, PLC broken or no electricity. It is not difficult to solve these problems. The main thing is to do a good job of pre-production inspection and timely maintenance after shutdown.
It is recommended that all customers and friends choose the filling machine from a powerful cosmetic equipment manufacturer. Yeto Machinery's cosmetic equipment is stable and reliable, and it also provides professional after-sales team services to ensure that customers have no worries about their production.